| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| first efforts (lots of pics) http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5358 |
Page 1 of 1 |
| Author: | PaddyD [ Tue Feb 28, 2006 4:48 am ] |
| Post subject: | |
here are photos of my first CNC exploits its so exciting watching stuff come out.... perfect!! 
these are some radius dish making rails as i dont have the grasp of 3d machining yet. 
these are the finished rails, awesome.... and no big bits of string!! 
a plywood strat!! (best tone) 
a plywood PRS.... i think i have cornered the luxury plywood guitar market 
some plastic letters 
and some plywood ones!!! i'll pst more as i do more |
|
| Author: | EBarajas [ Tue Feb 28, 2006 5:34 am ] |
| Post subject: | |
Very nice, good job! What software are you using? |
|
| Author: | PaddyD [ Tue Feb 28, 2006 5:42 am ] |
| Post subject: | |
rhino for now, mastercam router in a couple of weeks |
|
| Author: | Iplaytheoldies [ Tue Feb 28, 2006 2:53 pm ] |
| Post subject: | |
I'm looking forward to seeing what you come up with. I need one of these. |
|
| Author: | Don Williams [ Wed Mar 01, 2006 3:16 am ] |
| Post subject: | |
nice....you'll be making necks before you know it. |
|
| Author: | Serge Poirier [ Wed Mar 01, 2006 9:46 am ] |
| Post subject: | |
Way to go Paddy! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|